Generator Fuel Consumption Calculator

Fuel math is division, not vibes. Enter your burn rate from the generator manual and what you have stored. For load-specific planning, start with our generator sizing guide.

Your setup

From your manual, e.g. ~0.5 gal/hr at half load for a 3500W inverter. No manual? Size it first, then come back.

Runtime

Fuel on hand
5.0 gal
Runtime
10.0 hours
72-hour need
36.0 gal
Shortfall
31.0 gal

Close the gap

Fuel questions

How long will a 20-lb propane tank run a generator?

Divide 4.6 gallons by your burn rate. At 0.5 gal/hr that is about 9 hours; at 1 gal/hr about 4.5 hours. Enter your manual figure above for your exact number.

How much fuel for a 3-day outage?

Multiply burn rate by 72. A 3500W inverter at half load (~0.5 gal/hr) needs about 36 gallons: seven 5-gal cans with stabilizer, or eight 20-lb propane tanks.

Does gasoline go bad in storage?

Yes, in 3-6 months untreated. Dose every can with stabilizer at fill time and rotate yearly.

How this is calculated

Runtime (hours) = fuel on hand (gal) / burn rate (gal/hr). A 20-lb propane tank holds ~4.6 gal; gasoline stores in 5-gal cans dosed with stabilizer. No generic consumption figures are used: your manual's burn rate at your load is the only honest input.

20-lb propane tank runtime at common burn rates

Burn rate (gal/hr)One 20-lb tank (4.6 gal)72-hr need (gal)
0.3 (light load)15.3 hrs21.6
0.5 (half load)9.2 hrs36.0
1.0 (heavy load)4.6 hrs72.0